How to use chemicals to unblock drains?

There are several chemicals that can be used to unblock drains, such as baking soda, vinegar, caustic soda, and sulfuric acid. However, these chemicals can help you to clean your drain with less effort, but it is also harmful to the plumbing as well as the environment, so you should use these chemicals with the following safety precautions.

Here are some general steps to use a chemical or acid drain cleaner :

1. Drain cleaners are essential tools for cleaning drains, but they should be used with caution due to their caustic nature.
2. Safety precautions include wearing goggles, rubber gloves, and a face mask or respirator. Liquid drain cleaners should be used by grasping the handle, pouring the specified amount into the drain, and allowing up to 30 minutes for the clog to clear. 
3. For powder/crystal cleaners, remove standing water, add 1-3 tablespoons of product, and add one cup of cold water.

Alternatively, some natural mixtures like baking soda and white vinegar or baking soda and salt can also help with stubborn blockages.

Please note that it is always not recommended for any people, better to consult a professional plumber.

What are some common causes of blocked drains?

Some of the common causes of blocked drains are:

Blocked drains can be caused by various factors, including accumulated leaves, flushing the wrong sanitary products down the toilet, fat and oil from cooking, hair down the plughole, and soap scum. 

These substances can solidify in pipes, causing blockages. Additionally, tree roots, dirt, mineral deposits, offset pipes, and objects accidentally flushed down the drain can also cause blockages.

It is advisable to consult a professional plumber before using chemicals or natural mixtures to unblock your drainage system.

Use Caustic Soda Drain Unblocker

To use caustic soda to unblock outside drains, follow these steps:

1. Mix 100 grams of caustic soda with a liter of cold water.
2. Pour the prepared solution into the blocked drain.
3. Wait about 30 minutes.
4. Boil 4 liters of water and use it to flush the drain.
5. If the block persists, repeat this procedure a couple of times.

Caustic soda is a potent cleaning agent capable of removing grease, hair, and debris, but it’s crucial to follow safety precautions to prevent blockages in drains.

Drain Unblocking Cost

There are several sulphuric acid-based drain unblockers available in the UK, such as:

1. Enzymatic drain cleaners: This extra-strong formula can rapidly remove drain blockages and odors. It comes in a pack of 5 doses and costs £8.95.
2. Trade Heavy Duty Drain Unblocker Liquid: This multipurpose plughole cleaner can be used for sinks, showers, and toilets. It comes in a pack of 2 and costs £16.99.
3. Hg Kitchen Drain Unblocker: This liquid cleaner can effectively remove blockages in sink or shower traps. It comes in a pack of 2 treatments and costs £4.50.
4. Spear Jackson Heavy Duty Sink and Drain Unblocker Gel: This powerful formula can be used indoors and outdoors. It comes in a pack of 5 liters and costs £21.27.
5. Zep Commercial Unblocker Heat Drain Liquid: This drain cleaner can dissolve hair, grease, and other debris in pipes. It comes in a bottle of 1 liter and costs £9.60.

Always try to use these safety precautions before using them.

• Wear safety goggles, a face mask, and rubber gloves that extend beyond the wrist.
• Do not use caustic soda on aluminum or galvanized pipes as it can cause damage.
• Do not mix caustic soda with other cleaning agents as it can cause dangerous chemical reactions.

Please note that it is always better to consult a professional plumber before using any chemicals or natural mixtures to unblock your drainage system.

However, it’s not necessary to use Camichal as a plumber but, is essential for drain cleaning, as chemical drain cleaners, which use strong acids or alkalis, are effective on slow-moving drains but can cause property damage if misused.

Consult a licensed plumber or chemical specialist for proper usage. If unsure if a drain cleaner is suitable, try a plunger, but hiring a plumber is the best option to avoid costly damage.

How do I know if a plumber is reliable?

A reliable plumber is essential for any plumbing project. They should have the necessary credentials, licenses, and insurance, as well as experience in the industry.

They should also provide references from previous clients and provide a detailed estimate of the cost before starting the job. A good plumber should offer a warranty on their work.

It is also beneficial to look for plumbers who are members of trade associations such as the Association of Plumbing & Heating Contractors (APHC) and the Chartered Institute of Plumbing and Heating Engineering (CIPHE). 

By doing so, you can ensure a trustworthy and efficient plumbing service.

If you need a reliable plumber in Birmingham Uk Master Drains would be your best choice as your first plumbing service including Drain Unblocking, Drainage CCTV Survey, Gutter Cleaning Service, and Driveway Pressure Wash.

 If you choose our service you will get a warranty on your service, we have 100% satisfaction in our customer service.